 |
Precision Hollow Shaft CNC Machined for Robotics and Automation
Detail produk:
| Tempat asal: | Cina |
| Nama merek: | Zhisheng |
Syarat-syarat pembayaran & pengiriman:
| Kuantitas min Order: | 1 ton |
|---|---|
| Harga: | dapat dinegosiasikan |
| Kemasan rincian: | Minyak anti karat dioleskan pada bahan dan setiap batang dikemas dalam selongsong kertas |
| Waktu pengiriman: | 30 hari |
| Syarat-syarat pembayaran: | L/C,T/T |
| Menyediakan kemampuan: | 30 ton sehari |
|
Informasi Detail |
|||
| Pendinginan frekuensi tinggi: | HRC50-60 | Kekerasan Permukaan: | 800-1150HV |
|---|---|---|---|
| Perawatan Permukaan: | Pelapisan kromium, pengerasan induksi frekuensi menengah dan tinggi, pendinginan dan tempering, pend | Tes semprotan garam: | Tingkat 9150-300 jam |
| Kemampuan las: | Bagus | Sedang mengemas: | Setelah perawatan minyak pencegah karat, setiap bagian dibungkus dalam tabung kertas/kotak kayu taha |
| Sertifikat kualitas: | Memberikan laporan kualitas produk, laporan ketebalan pelapisan kromium, laporan pengujian semprotan | Kekerasan pendinginan dan temper: | HB220-360 |
| Lurus: | ≤0,1mm/m | Kekasaran Permukaan: | ≤0,05μm |
| Ketebalan pelapisan kromium: | 0,02mm-0,50mm | Toleransi Diameter Luar: | Opsi lain yang dapat disesuaikan) |
| Panjang: | L200-20000mm | Ukuran: | φ20-φ500mm |
| Menyoroti: | CNC machined hollow shaft,precision hollow shaft for robotics,automation hollow shaft with warranty |
||
Deskripsi Produk
Hollow Shaft
Product Attributes
| Attribute | Value |
|---|---|
| High-frequency quenching | HRC50-60 |
| Surface hardness | 800-1150HV |
| Surface treatment | Chromium plating, medium and high frequency induction hardening, quenching and tempering, quenching and tempering+medium and high frequency induction hardening |
| Salt spray test | Level 9150-300 hours |
| Weldability | good |
| Packing | After rust prevention oil treatment, each piece is wrapped in a waterproof paper tube/wooden box |
| Quality certificate | Provide product quality reports, chromium plating thickness reports, salt spray test reports, etc |
| Quenching and tempering hardness | HB220-360 |
| Straightness | ≤0.1mm/m |
| Surface roughness | ≤0.05μm |
| Chromium plating thickness | 0.02mm-0.50mm |
| Outer diameter tolerance | Other customizable options |
| Length | L200-20000mm |
| Size | φ20-φ500mm |
Product Overview
The Hollow Shaft is produced using advanced CNC machining and precision grinding technology to achieve high accuracy, concentricity, and straightness. It is particularly suitable for robotics, automation, and high-speed precision systems.
Manufacturing Process
- CNC turning, drilling, and honing for accuracy
- Multi-step grinding for concentricity and straightness
- Surface finishing to minimize wear and noise
Features & Advantages
- High dimensional accuracy with tight tolerances
- Excellent concentricity between outer and inner diameter
- Reduced vibration and noise during operation
- Smooth motion with long service life
Applications
- Robotics & automation systems
- Precision measuring equipment
- High-speed spindles
- Medical devices and laboratory instruments
Customization Options
- Inner bore: round, hexagonal, or splined design
- End machining for couplings or gear integration
- Special stainless steel grades (304 / 316) available
- Optional surface hardening treatments
Chemical Composition
Ingin Tahu lebih detail tentang produk ini